Keterangan :

Benefits

One gauge for Fe & NFe substrates ( QNix® 4500 only) .
Automatic substrate recognition ( QNix® 4500 only) .
Simple, fast coating thickness measurements.
Large, clear numbers for optimal readability.
One-hand operation for all measurements.
No calibration required.
Automatic On/ Off switching.
High precision over entire 120 mil measuring range
Compact design with integrated probe.
Innovative, proven technology: hall sensor and eddy current
Audible signal for confirmation of measurement.
Non-wearing ruby probe tip for long-term use
Automatic substrate recognition ( QNix® 4500)

Technical Data

Substrates

QuaNix 4500: Steel, Iron plus non-ferrous ( NFe)
( e.g. aluminum, stainless steel, zinc, copper, brass) .
QuaNix 4200: Steel or Iron ( Fe) substrates only.

Principle of operation

Fe substrates: Magnetic flux / Hall effect.
NFe substrates: Eddy current ( 4500 only) .

Minimum Measurement Area

0.4" x 0.4" ( 10 x 10 mm)

Minimum Curvature

Convex: 0.2" ( 5 mm)
Concave: 1.0" ( 25 mm)

Minimum Substrate Thickness

Fe: 8 mil ( 0.20 mm)
NFe: 2 mil ( 0.05 mm) ( 4500 only)

Measuring Range

0.00 - 120.0 mil ( 0 - 3000 µ m)

Measuring Resolution

0.01 mil from 0 to 9.99 mil
0.1 mil from 10 to 120 mil

Accuracy

± 0.08 mil ± 3% ( 2 µ m ± 3% )

Time per Measurement

600 ms

Temperature Range

Storage: 14° F to 122° F ( -10° C to 50° C)
Operating: 32° F to 140° F ( 0° C to 60° C)

Probe

Integrated in instrument.
Polished ruby tip for freedom from wear.

Display Type

Graphic LCD display with backlight

Displayed Parameters

Large number for reading, battery condition,
operating mode

Power Source

2 AA 1.5V alkaline batteries

Dimensions

3.9" x 2.4" x 1.1" ( 100 x 60 x 27 mm)

Weight

3.7 oz ( 105 g) including batteries

Kit Contents

Coating thickness gauge, carrying case
reference plates, two AA alkaline batteries
test certificate, instruction manual

Standards Compliance,
QuaNix 4500 & 4200

DIN EN ISO 2808, DIN 50981, ISO 2178,
BS 5411 ( 3 & 11) , BS 3900 - C5, ASTM B 499,
ASTM D 1186, ASTM D 7091

Standards Compliance,
QuaNix 4500 only

DIN 50984, ISO 2360, ASTM D 1400