Katalog Produk

Keterangan

Turbidity is measured according to ISO 7027 by nephelometric means ( 90 scattered light) . The infrared light-source permits measurement of coloured and colour-free samples.

The automatic measurement range detection facility ( Autorange) enables direct turbidity measurement from 0.01 to 1100 NTU with an accuracy of 2% up to 500 NTU and 3% thereafter.

A large graphic display, a choice of several different languages and user-friendly operating instructions make the device extremely easy to use.

Software updates ( languages; methods; applications) can be downloaded free of charge from our website www.tintometer.com.
Advantages:

*

Automatic overall range adjustment with just 4 standards

*

Meets ISO 7027

*

High accuracy

*

For laboratory and mobile use

*

RS232 interface

*

Storage for up to 1000 data-sets

*

Real-time clock

*

Waterproof sample chamber and housing

Applications:

*

Drinking Water Treatment

*

Waste Water Treatment

*

Food and Beverage Industry

*

Petrochemical Industry

Technical data
Principle: nephelometric ( 90 scattered light)
Light source: IR-LED ( 860 nm)
Keypad feedback: Conditional acid and solvent resistant; membrane switch keypad with audible
Auto Off: Automatic switch off approx. 20 minutes after last key press
Display: Graphic-Display
Update: Software update via Internet
Clock: Real time clock
Memory capacity: 1000 data sets with date, time and registration number
Sample volume: approx. 12 ml
Range: 0.01 1100 NTU ( Auto range)
Resolution: 0.01 from 0.02 - 9.99 ( NTU) 0.1 NTU from 10.0 - 99.9
1 NTU from 100 - 1100
Accuracy: 2 % of reading or 0.01 ( NTU) ( 0 - 500) 3 % of reading ( 500 - 1100)
Ambient conditions: Temperature: 5-40C at 30-90% relative humidity ( non condensing)
Temperature: 5-40C at30-90% relative humidity ( non condensing)
Interface: RS232 for printer and PCconnection; 9-pin D-sub-mail connector; data format ASCII
Power supply: 7 NiCd rechargeable batteries ( Type AA/ Mignon with 800mAh) ; wall plug mains adapter ( Input: 7 NiCd rechargeable batteries ( Type AA/ Mignon with 800mAh) ; wall plug mains adapter ( Input:
100-230V, 50-60Hz; Output: 15V; 530mA) and Lithium battery ( CR 2032, 3V) for data storage and real time clock.
Weight: approx. 1000 g including batteries and power pack
Dimensions: approx. 265 x 195 x 70 mm ( L x W x H)
Specification: meets ISO 7027
Approval: CE
Guarantee: 2 years