Katalog Produk

Keterangan

pH Meter -021 26327478

pH Meter Microprocessor WalkLab TI9000

Features:

Ease of use
Automatically lock reading when a stable reading is established.
Feature can be disabled to allow continuous reading display.
Automatic shut-off
Meter automatically shuts off after 5 minutes after last key command. Feature can be disabled while reading in continuous read mode.
One-touch calibration
The meter is one-touch auto-calibration procedure uses only one button to activate the mode.
The unit will prompt and confirm offset and slope point calibration

Specification

pH mV Temperature
Range: 0 to 14 pH
± 999 mV 0 to 100° C
Display Resolution: 0.01 pH 1 mV 0.1° C
Accuracy ( machine only) : ± 0.01 pH ± 1 mV ± 0.5° C
Temperature compensation: Automatic or manual from 0 to 100° C
Operating Temperature: 0 to 50° C
Operating humidity: Maximum 90% relative humidity
Slope recognition: ± 20% at pH 4 and pH 10
Offset recognition: ± 60 mV at pH 7
Input impedance 10¹ ² ohms
Battery type: DC9V ( 1604A, 6LF22 or equivalent)
Battery life: Approximately 200 hours
Size: 164 x 83 x 35mm
Weight: 350gm ( main unit including battery)

Order Code Standard Accessories
WalkLAB Microprocessor pH Meter TI9000 1. Main instruments
2. PE03 - Epoxy body combination pH electrode
3. TP200 -pH microprocessor temperature probe ( Stainless steel)
4. 7010 - Buffer solution pH7.00 100ml
5. 4010 - Buffer solution pH4.01 100ml
6. Carrying case
7. Operation manual