Keterangan :

The MR101.2 moisture meter is designed for the rapid analysis of water content in powders and granules, and provides measurements that are insensitive to sample preparation, including variations in bulk density. Samples are simply poured into an appropriate measurement cup ( supplied) which is then positioned on the meter, and the moisture content indicated on the digital display. Pre-set calibrations for different materials can be entered into the computer memory, making this a versatile device for a range of materials. The MR101.2 moisture meter is suitable for the measurement of a variety of materials, including sugar, sand, chemicals, pharmaceuticals, and other materials with low to super low moisture content.

# Range of moisture measurement: typically within 0.01 to 16% ( and depends on the type of material being tested)
# Resolution, in % moisture: 0.001%
# Accuracy depends on material under test, and generally increases with decreasing water content and calibration range ( see Table 2 overleaf)
# Memory for up to 10 calibrations* , for different types of materials
# Measured water content is independent of bulk density, particle size/ shape.
# Sample volume : 40 to 50 cm3
# Wipe clean surfaces
# Reliable and robust
# Stable calibration
# Dust and water protected
# Frost-resistant indicators
# RS-485 interface for data logging to computer

Parameter .
Weight of meter ( kg) No more than three
Dimensions of meter ( approx., cm) 35 ( h) x 22 ( w) x 12 ( depth)
Volume of sample cup ( cm3) 50
Dimensions of sample cup ( cm) D4
Power supply ( V) 190/ 240
Power consumption, max ( W) 40
Display refresh rate, min ( seconds) 1
Analogue output ( mA) 4-20
Serial port standard RS-485
Operation temperature range ( ° C) + 5 to + 45
Operation ambient humidity ( % RH) 40 to 98