PORTABLE WATER TESTING POTALAB
Made in Wagtech - United Kingdom
Model : WAG-WE10010

ADVANCED Portable Water Quality Testing Laboratory

Designed for combined testing of both the micro-biological and physico-chemical parameters of drinking water.

Ideally suited for wide parameter surveillance or longer term monitoring where extreme accuracy is important, suitable for use either in the lab or the field and conforms fully with WHO guidelines on water quality monitoring.

Used extensively by UNICEF, WHO and many major NGOs the world over.

- Digital twin incubator, featuring automatic timer and LCD display for up to 50 bacteriological tests

- Fully portable Incubator - can be powered via External rechargeable battery, AC mains operation, DC operation via vehicle lighter socket or even solar power

- Independent chamber temperature control, with an accuracy of ± 0.1º C, allows simultaneous incubation of both faecal & total coliforms

- Sophisticated hand-held digital meters for pH, Conductivity/ TDS & Turbidity

- Digital Photometer for testing up to 40 different chemical parameters

- Includes the Arsenator digital arsenic testing device, the worlds first low-cost field instrument capable of measuring arsenic down to ppb levels

- Reduces the reliance upon costly lab-based analyses for advanced levels of monitoring

- Uses, long-life, low-cost reagents and consumables available locally through Wagtech in-country representatives

- Supplied with reagents & consumables to carry out 200 micro-biological tests and 200 tests each of Ammonia, Arsenic, Chlorine ( DPD1 & 3) , Fluoride, Nitrites and Nitrates

- Comprehensive but simple to use operation manuals for all instruments

- All components housed in a single, lockable, water-proof aluminium carry case

For Microbiological, physico-chemical testing in the lab or field.
Wide range of physico-chemical parameters can be measured using highly accurate digital instruments.

More cost effective than central laboratory testing.
Simple technique - Dual incubator allows analysis of both faecal & total coliforms simultaneously.
Results incubated in just 14 hours.
Completely portable - even runs off solar power.
Uses low cost, long-life consumables, and equipment is easily sterilised in the field.
Supplied with reagents for Ammonia, Arsenic, Chlorine, Fluorides, Nitrites and Nitrates as standard. Other parameters available on request.
Conforms to WHO Guidelin

Potalab 1 is a portable microbiological and physico-chemical testing laboratory designed to assess the suitability of drinking water on-site.
It provides bacteriological testing using
the accepted method of membrane filtration and incubation of faecal and total coliforms as an indicator of the presence of other harmful bacteria and viruses.
The physico-chemical instruments are used in combination to quickly examine a supply to determine if a more detailed microbiological examination is required.
All equipment is easily packed within the aluminium case for complete portability.

Pothalab 2 provides the same equipment and facilities as Potalab 1, but without the physico-chemical instrumentation.
The purpose of this unit is for microbiological testing only,

PT OCTA PRIMA LESTARI
TLP : 85918154-55 , 8512595 , 85902391
www.octaprimalestari.com