Keterangan :

Foam Fomtec AFFF 
AFFF 6%
Fomtec AFFF 6% is intended for use on class B hydrocarbon
fuel fires such as oil, diesel and aviation fuels. It can be used with both aspirating and non-aspirating discharge devices. The product is approved EN 1568 and Lloyds regsiter for use on board ships according to the IMO/ Solas regulations. Fomtec AFFF 6% is especially suited whenever rapid fire knock-down is essential. It is compatible with all dry chemical powders and can be used in powder/ foam twin agent systems.
Description
Fomtec AFFF 6%   is an aqueous film forming foam concentrate ( AFFF) consisting of fluorocarbon and hydrocarbon surfactants blended with various solvents, preservatives and stabilisers.
The foam forms an aqueous film that rapidly cuts off the oxygen supply and thus knocks down the fire. The expanded foam from which the film is drained forms a stable blanket that suppresses the release of flammable vapours and cools down the fuel surface extinguishing the fire and preventing re-ignition.
The low surface tension of the water foam concentrate solution enables the aqueous film, although heavier than the burning liquid, to float on top of the liquid surface.
Fomtec AFFF 6% should be used at 6% proportioned solution ( 6 part concentrate in 94 parts of water) in fresh or seawater. It may also be stored as a pre mix solution in fresh water.
Application
Fomtec AFFF 6% is intended for use on class B hydrocarbon fuel fires such as oil, diesel and aviation fuels. It can be used with both aspirating and non-aspirating discharge devices.

Fomtec AFFF 6% is especially suited whenever rapid fire knock-down is essential. It is compatible with all dry chemical powders and can be used in powder/ foam twin agent systems.
Fire Performance & Foaming
The fire performance of Fomtec AFFF 6% has been tested and documented  according to the UK Ministry Of Defence Standard 42/ 40 and EN 1568 Part 3 at 6% proportioning. Foaming index no less than 7: 1 ( normally 8: 1) . 25% drainage time 3.0 minutes ( normally 3.5) .

Technical data
Appearance : Clear Amber Liquid
Specific gravity @ 20° C : 1.005 + / - 0.01 g/ ml
Viscosity approx @ 20° C : < 20 cSt
pH : 7.5 + / - 1.0
Freezing point : - 3° C
Pour point : - 2° C
Suspended sediment ( v/ v) : Less than 0.2%
Surface tension approx : 20.0 dynes/ cm

Packaging
We supply Fomtec in 25 litre cans and 200 litre drums. We can also ship in 1000 litre containers or in bulk.
International Approvals
Fulfills the requirements of the following standard:
l  EN 1568, part 3
l  Lloyds Register of Shipping
l  Bureau Veritas