Keterangan :

Ultrasonic Flaw Detector

Features & use :
• Measuring of pitch interval and analyze of echo times
• Auto-calibration of probe and auto-gain
• Two measuring unit: mm/ inch
• All built in software can be up-graded on PC
• Lock/ unlock the system parameters
• Equipped with gate seting and alarming function
• Two measurement waveform and detection parameters
• Freeze/ defreeze waveform and detection parameters
• Communicating with PC by RS232 port for transferring the measuring data and system parameters
• 10 detecting channels are available with separated detecting parameters and DAC curve in every channel
• Automatic generation of DAC curve, and 30 points can be recorded at most, adjustable offset curves and gain correction functions are available
• Provided with linear reject function, the highest range is 80% of the screen height
• Memory up to 300 A scanned images, parameters and DAC, and 30000 thickness values
• Four reality eays: positive half-wave, negative half-wave, full wave and radio frequency
• Three detecting modes: single-probe, dual-probe ones and transmission
Standard delivery :
• Main unit 1
• Power adaptor 1
• Neck strap 1
• Cable for probe 2
• Carrying case 1
• Instruction manual 1
• Straight probe 1
• Angle probe 1
• Couplant 1
• Warranty card 1
• Instruction manual 1

Spesifications
Scanning Range ( mm) 2.5 ~ 5000
Scanning Resolution ( mm) 0.1( 2.5 ~ 100) 1( 100 ~ 5000)
Gain Range ( dB) 0 ~ 110
D-Delay ( ¼ s) -20~ + 3400
P-Delay ( ¼ s) 0~ 99.99, resolution 0.01
Sound Speed ( m/ s) 1, 000 ~ 9, 999
Bandwidth ( MHz) 0.2 ~ 15( Low0.2 ~ 1, Mid. 0.5 ~ 4, High 3 ~ 15)
Vertical linearity Error ( % ) d3
Horizontal Linearity Error ( % ) d0.2
Dinamic Range ( dB) e32
Rectification Positive half wave, negative wave, full wave, and RF
Sensitivity Leavings ( dB) 60
Test Mode Pulse-echo, dual and through transmission
Pulser Spike Excitation Pulser
Damping ( ohms) 50, 150 and 400
Reject Linear, 0-80% of full screen, variable in steps of 1%
Unit mm/ inch
Interface RS232
Printer TP UP-NH-S line thermal printer
AC Requirements 85 ~ 26V AC/ 1.0A, 47 ~ 63Hz
Temperature ( ° C) -10 ~ 40
Humidity 20% ~ 90% RH
Power Supply Li battery 4 x 3.6V 4000mAh
Charging Time ( hours) 4 ~ 5
Weight ( kg) 1.47
Overall Dimensions ( mm) 243 x 173 x 70