Keterangan :

WIRE ROPE TESTER

General Information
Safe and reliable use of industrial objects often depends on the technical condition of wire cables, referred
to commonly as " wire ropes" . Such ropes typically deteriorate during their lifetime for various reasons,
such as external and internal corrosion and abrasion, static and dynamic mechanical stresses, etc.
Deterioration results in the loss of metallic cross-sectional area ( LMA) and local faults ( LF) , such as broken
individual wires and strands. Information concerning the technical condition of rope allows timely
remedial actions that increase rope life and ensure their continued safe use. This information can only be
obtained with special instruments.
Important Features of INTROS
· Designed for inspection of round, flat and
rubber flat wire ropes
· Light weight with small magnetic heads and
data logger dimensions
· Accurate readings and computer processing
· No special preparation of the rope is required
for inspection
· Speed of rope under test does not affect readings
· Easy and fast installation on ropes
· Rugged construction
· Simple-to-use calibration modes
Principle of Operation
INTROS utilizes the MFL principle of operation. The magnetic
head is installed on a rope and travels along the rope during
the test.
The magnet' s field saturates rope section in longitudinal direction.
Irregularities in the rope such as LMA and LF cause redistribution
of the magnetic flux surrounding the rope, that are detected by
sensors* . Signals from the sensors contain critical information
concerning LMA and LF, and other important conditions.
Software WINTROS
WINTROS software is specially developed for on-line recording of stored data to a computer. The program
has a user friendly interface and can be used with all versions of WINDOWS. WINTROS allows inspection
information to be downloaded from the data logger to a computer, detailed analysis of charts including zoom,
filtering and cut-off options, chart comparisons, modification of INTROS settings and calibration.
Additionally, WINTROS automatically generates the test report, including LMA and LF charts.
Ropes
Round
 6… 24 mm
( 0, 2� … 1� )
Dimensions
Weight
235 x 230 x 64 mm
( 9, 3� x 9, 1� x 2, 5� )
3 kg
( 6, 6 lbs)
Typical Applications
Elevators, cranes,
ropeways
12-001E Flaw detector ( Wire Rope Tester) INTROS
for inspection of ropes with diameter 6 … 24 mm,
complete with:
- Basic unit. Data logger 4Mb
- Magnetic head MH6-24
- Software WINTROS
- Fixing slings